BP Crate Engine
461-474
cu. in.
as seen
on OverHaulin'
We
can do this engine using any of the rotating
assembly combinations from our assembly list
- Performance prepped 400/ 428 /455 block -Bead Blasted and Magnafluxed, Sonic Tested, Completely Deburred, Bored and Honed with Torque Plate - Line Honed with ARP Main Studs, Deck Squared, Painted, Cam Bearings, and Brass Freeze Plugs Installed.
- Crank 4.250 Stroke - Cast or Forged
- Eagle 6.800" Rods w/ ARP Bolts 8740
- Butler / Ross Pistons
- Pins .990 x 2.500"
- Total Seal Classic Race Rings
- Main & Rod Race Bearing- Federal Mogul or Clevite
- Complete Gasket Set w/ Rear Main Seal
- JPP Billet Gear Timing Chain
- Comp Cams Hydraulic Cam & Lifters
- Roller Tip Rockers
- Canton Oil Pan
- Melling Oil Pump w/ Pickup
- HD Oil Pump Drive Shaft
- Powerbond Balancer
- Timing Cover, Water Pump, Plate & Sleeves
- Ported Cast Iron Heads w/ Ferrea Valves, Bronze Guides, Valve Job, Springs, Locks, Retainers & Studs (Edelbrock Heads optional)
- ARP Head Bolts
- Performer RPM or Torker II Intake
- Stainless Steel Bolt Kit
- Chromemoly Push Rods
- Aluminum Valley Pan
- Chrome Valve Covers
- Oil Filter Housing
- Dipstick & Tubes
- Cam/Crank Bolts/Washer / Thrust Plate & Ecc
- Oil, Filter & Spark Plugs
- Internally Balanced
- Assembled With Blueprint Sheet
BP Crate Engine w/ Cast Crank (Long Block)
|
$9,945.00
|
BP Crate Engine w/ 4340 Forged Crank (Long Block)
|
$9,995.00
|
The
above engine can be upgraded with the parts listed below:
BP Crate Engine Upgrade |
Carb – Holley / Demon / Edel |
$499.00 & UP |
BP Crate Engine Upgrade |
Distributor and Wires |
$389.95 |
BP Crate Engine Upgrade |
Electronic Fuel Injection |
CALL |
BP Crate Engine Upgrade |
Run and Break-in on Test Stand |
$295.00 |
BP Crate Engine Upgrade |
Dyno and Tune |
$650.00 |
BP Crate Engine Upgrade |
March Serpentine Pulleys and Accessories |
CALL |
BP Crate Engine Upgrade |
Edelbrock Heads |
Starting @ $750.00 |
BP Crate Engine Upgrade |
4-Bolt Mains |
$285.00 |
BP Crate Engine Upgrade |
Victor Intake |
$105.00 |
BP Crate Engine Upgrade |
Full Roller Rockers |
$130.00 |
BP Crate Engine Upgrade |
Race Pan/Pick-Up |
$200.00 |
BP Crate Engine Upgrade |
Solid Roller Lifters |
$200.00 |
BP Crate Engine Upgrade |
Hyd. Roller Upgrade |
$699.00 |
BP Crate Engine Upgrade |
BP Aluminum Valve Covers |
$260.00 |
Below
taken from Street Rodder Magazine
http://www.streetrodderweb.com/tech/0712sr_performance_crate_engines/index.html
Butler
Performance
There are plenty of rodders who would like to
run a Pontiac V-8. Butler Performance is a proven
Pontiac expert throughout the broad range of
Pontiac powerplants. The company builds stock
to rare factory engines, including the 389 Tri-power,
SD421, RAII, RAIII, RAIV, HO455, SD455, and
RAV. Additionally, Butler can internally modify
any of these engines to include strokers, head
porting, and much, much more. Once finished,
the Butler Pontiac engines feature greatly improved
power and durability while maintaining a totally
stock appearance. But it doesn't stop there.
The company can install the latest aftermarket
accessories, such as custom valve covers, a
myriad of induction systems from single four-barrel
to supercharged, in addition to serpentine belt
systems, air conditioning, power steering, and
alternator brackets and components. Butler's
crate engines start at 500 hp and 550 lb-ft
of torque and will do so on 91 octane. Now that's
a real street motor! According to Butler Performance,
you're just a cam and induction upgrade away
from the 600-plus-horsepower and torque range.
These are based on Pontiac 400 or 455 blocks
and use the company's long rod stroker kits
and ported Edelbrock heads. Additionally, the
Butler crate engines using aftermarket blocks
(505 to 541 inches) feature larger bores (4.380
inches) made possible by the thicker-than-stock
cylinder wall. These engines can produce upward
of 700 to 750-plus horsepower on pump gas. Butler
offers everything from street to race motors,
carb to fuel injection-it is really a matter
of your personal taste for performance.
Butler Performance
866-762-7527
www.butlerperformance.com
|